Search
HYCUT two-component metalworking fluids reduce costs through comprehensive process optimisation
Our HYCUT products are based on synthetic ester oils and can be used multifunctionally as machining oil, hydraulic oil, two-component metalworking fluid and cleaner. As HYCUT products are compatible with each other, intermediate cleaning, for example, is no longer necessary.
Another special feature of HYCUT as an emulsion is the ability to control oil and additives separately throughout its entire service life. This allows perfect adaptation to different process, material and lubrication performance requirements.
- Products based on renewable raw materials
- Defossilisation through mineral oil-free formulation
- Multifunctional use as machining oil, hydraulic oil, two-component metalworking fluid and cleaner
- Cost reduction through holistic process optimisation
- Tailor-made solutions
- High human and environmental compatibility
- First-class service with individual on-site consultation
HYCUT – in oil processing
All cutting and grinding oils in the HYCUT family are based on synthetic ester oils. These offer extremely high lubricating performance, thereby significantly reducing tool wear. The use of synthetic, saturated ester oils makes the products highly resistant to ageing. This ensures long service life. In addition, the high cleaning performance of the synthetic oils ensures clean machines and components and, especially during grinding, exceptionally good removal performance.
At a glance:
- No labelling required, even at low viscosities
- Easy cleaning with aqueous media and, ideally, complete elimination of cleaning
- Low odour and low evaporation, thus improving working conditions
- Increased occupational safety due to comparatively higher flash points compared to mineral oil products
- Proven process reliability thanks to approvals from renowned machine manufacturers
HYCUT SE 12 has 30% lower evaporation loss compared to a conventional mineral oil-based grinding oil of the same viscosity (according to Noack, at 150 °C).
HYCUT – as a two-component MWF
The unique feature of HYCUT as an emulsion is that both the oil and the additives can be controlled separately. This allows precise adaptation to a wide range of processes, materials and lubrication performance requirements. The individual components can be specifically replenished throughout the entire service life of the emulsion. Well-known manufacturers in the German automotive industry rely on the HYCUT system, which meets the special requirements for cost-effectiveness and process reliability. Thanks to the wide range of applications and flexibility of HYCUT, entire production areas can be supplied with just one MWF system.
At a glance:
- Economical consumption thanks to extremely good drainage behaviour
- High degree of foreign oil separation, making emulsion maintenance easy
- Stable processes, as it is foam-free even with low water hardness
- Clean workpieces, tools and machines thanks to excellent rinsing properties
- Very good skin compatibility, as the additive content remains constant regardless of the concentration used
HYCUT – for the entire process chain
Pretty clever: components that have first been treated with HYCUT oil can be further processed with HYCUT emulsion without intermediate washing. Oil residues, e.g. from the bed rail, improve the lubricating performance instead of contaminating the emulsion. And if intermediate cleaning is necessary, the HYCUT cleaner is simply returned to the emulsion. You too can work economically with HYCUT in the future.
HYCUT components can also be used in machine lubrication – both as a hydraulic medium (in ISO VG classes, comparable to HLP oils) and as bedway lubrication (sliding way oils, comparable to CGLP types). The major advantage lies in the excellent emulsifiability and complete compatibility within the HYCUT system. This avoids foreign oil and interface problems, reduces waste quantities and significantly reduces the number of additives used. At the same time, the use of mineral oil-based lubricants is completely eliminated.
At a glance:
- No labelling required, even at low viscosities
- No negative influence from foreign oils
- Service life of up to several years
- Suitable for centralised systems and larger individual machines
- Reduction in washing processes
- Recycling of the cleaner into the emulsion
- Reduction in disposal and energy costs
Please feel free to contact us for a no-obligation consultation.
What are synthetic ester oils?
In the production of synthetic esters, the fatty acid obtained chemically from native oils is specifically reacted with an alcohol that is also obtained from natural sources or a synthetic alcohol. This allows the chemical composition and degree of purity to be precisely controlled. Like native vegetable oils, synthetic ester oils are mineral oil-free and biodegradable, but are usually much more durable and effective.
Very high human and environmental compatibility
Ester oil-based cutting oils are generally significantly more compatible with humans and the environment than mineral oil-based products. The latter are classified as hazardous to aspiration, for example at low viscosities. In addition, ester oils are more readily biodegradable than mineral oils.
No chance for foreign oil
Water-miscible metalworking fluids contain emulsifiers that disperse (emulsify) the base oil into fine oil droplets. Since the emulsifiers contained in HYCUT are optimised for ester oils, foreign mineral oils are not emulsified in the metalworking fluid. The foreign oil is separated at the surface and can be easily removed, e.g. using suitable oil skimmers.
All two-component metalworking fluids
With our product finder, you can select the desired parameters and immediately receive the appropriate solution.
Can't find what you're looking for?
For individual inquiries or further information, please contact us at:
infouk@
oemeta.com / 01295 713 280 / Contact form
United Kingdom
