Excellent lubrication performance with the Oemeta minimum-quantity lubricants (MQL) of the MICROTOL product range.

Minimum-quantity lubricants, or MQL for short, are applied in the area between the tool and the workpiece using special spray systems. This ensures optimum lubrication and cooling combined with minimum cooling lubricant consumption.


Oemeta MICROTOL products – the powerful solution for minimum-quantity lubrication.

Depending on the area of application, different basic lubricants are used for a high level of process and material compatibility. The Oemeta MICROTOL products offer excellent lubrication performance and are suitable for both 1-channel and 2-channel systems.

Optimised aerosol behaviour and a proven high level of process reliability.

The optimised aerosol behaviour of the MICROTOL products ensures efficient lubrication and cooling in the machining process with little loss through misting. The process reliability of Oemeta’s minimum-quantity lubricants (MQL) has been proven by various approvals issued by well-known customers and equipment manufacturers.

Benefits of the Oemeta MICROTOL products

  • Excellent residue behaviour ensures clean workpieces and machine parts
  • Suitable for all common dosing systems (1-channel and 2-channel systems)
  • Excellent material compatibility
  • Very good lubrication performance increases tool life
  • Good human and environmental compatibility
  • Very good wetting properties

Products based on fatty alcohol:

These high-performance products are based on fatty alcohols, which offer particularly good residue behaviour.

MICROTOL FA 20

  • Recommended for all metallic materials
  • Suitable for light to medium chip removal, deep drawing, bending and punching
  • Excellent adhesion and good cooling effect
  • Excellent spraying behaviour
  • Viscosity at 40° C: 21 mm²/s
  • Neutral odour

MICROTOL FA 20

 

MICROTOL FA 30/E

  • Recommended for all metallic materials
  • Suitable for light to medium chip removal, deep drawing, bending and punching
  • Self-emulsifying characteristics*
  • Very good wetting properties
  • Specially developed for cleaning with aqueous media
  • Excellent spraying behaviour
  • Very good cooling and lubricating properties
  • Viscosity at 40° C: 32 mm²/s
  • Neutral odour

MICROTOL FA 30/E


Synthetic ester oil-based products:

These high-performance products are based on synthetic ester oils and renewable raw materials.

MICROTOL EC 12

  • Recommended for all common machining materials
  • Suitable for light forming and machining processes
  • Self-emulsifying characteristics*
  • Compatibility with Oemeta HYCUT system
  • Viscosity at 40° C: 13 mm²/s
  • Free of chlorine compounds

 

MICROTOL EC 32

  • Recommended for all common machining materials
  • Suitable for medium forming and machining processes
  • Self-emulsifying characteristics*
  • Compatibility with Oemeta HYCUT system
  • Viscosity at 40° C: 32 mm²/s
  • Free of chlorine compounds and silicon

*Self-emulsifying characteristics

MICROTOL EC 32

* The self-emulsifying characteristics of these products in water simplifies subsequent washing processes – a distinctive feature as compared to commonly available products.

This is just a selection from our range of products. For your individual questions or information requests concerning our products or safety data sheets, please send an e-mail to products@oemeta.com or request a quote via our contact form.


Minimum-quantity lubricants

With our product finder you can select the desired parameters and immediately receive the right solution.

Reset Product Finder
0 products found

MICROTOL EC 32

Minimum Quantity Lubricants
MICROTOL EC 32 is a high performance product based on synthetic ester oils to be used as minimum quantity lubricant. Self-emulsifying characteristics make subsequent washing processes easier.
https://www.oemeta.com/en/products-services/product/microtol-ec-32
Compatible materials:
Aluminium
Grey Cast Iron
Non-ferrous metals
Stainless Steel
Steel
Applications:
Drilling
Turning
Milling
Tapping
Forming
Learn more

MICROTOL FA 20

Minimum Quantity Lubricants
MICROTOL FA 20 is a high performance product based on fatty alcohols to be used as minimum quantity lubricant.
https://www.oemeta.com/en/products-services/product/microtol-fa-20
Compatible materials:
Aluminium
Grey Cast Iron
Non-ferrous metals
Stainless Steel
Steel
Applications:
Drilling
Turning
Milling
Tapping
Forming
Learn more

MICROTOL FA 30/E

Minimum Quantity Lubricants
MICROTOL FA 30/E is a high performance product based on fatty alcohols to be used as minimum quantity lubricant. Self-emulsifying characteristics make subsequent washing processes easier.
https://www.oemeta.com/en/products-services/product/microtol-fa-30/e
Compatible materials:
Aluminium
Grey Cast Iron
Non-ferrous metals
Stainless Steel
Steel
Applications:
Drilling
Turning
Milling
Tapping
Forming
Learn more

How can we help you?

If you’re interested in our products and services or have any questions or suggestions, please don’t hesitate to contact us.

Oemeta Chemische Werke GmbH

Ossenpadd 54
25436 Uetersen
Germany