Equipment and specialist support relating to Oemeta cooling lubricants.
Our in-house and field service teams are always available to provide you with advice and support in the selection and use of Oemeta cooling lubricants. If problems occur, experts are on hand to help find solutions, which are often resolved using supplementary equipment or specialist devices. Tapping into this knowledge, we have essentially documented our recommendations. Included is a selection of hand-picked, tried-and-tested pieces of equipment.
Oemeta offers high quality products by Dosatron for dosing and proportional mixing of coolants in the case of new filling and top-up with water. Installed directly in the water supply line, the Dosatron proportional dispenser operates by using water pressure as its sole power source. In this way, the cooling lubricant concentrate is drawn in, dosed to the desired percentage and mixed with the water. The ready-to-use emulsion then runs through the Dosatron and on into the machine. The use of the proportional dispenser ensures a constant mixing ratio of the fresh emulsion. Oemeta offers a wide range of Dosatron devices to suit the various areas of application. Feel free to contact us: we’ll be more than happy to advise you on which unit is best suited to meeting your requirements.
Oil skimmers remove floating tramp oils and contaminants from cooling lubricants and other liquids. Oemeta offers a selection of oil skimmers (band skimmers and tube skimmers) to meet a wide range of requirements. We’ll be more than happy to advise you on the selection of the right oil skimmer.
Hand refractometers are used for fast and accurate determination of the concentration of cooling lubricant emulsions. The refractive index of a specific liquid is determined by means of optical measurement using the refractometer.
For the monitoring and controlling of cutting fluids, Oemeta offers the following test strips:
- Nitrate test strips
- Nitrite test strips
- Total hardness test strips
- pH strips
- Test strips to determine the concentration of ADDITIV ET and BF concentration in HYCUT two-component emulsions
The Oemeta Test Kit enables every user of water miscible cutting fluids to determine the concentration accurately and on the spot. Only the perfect concentration ensures excellent machining results, optimum economy and the best possible occupational safety and environmental protection.
Cooling lubricant is constantly exposed to external influences in the course of use: impurities enter from outside, such as hydraulic and slide way oils, salts, preservatives and waste. Coolant ingredients are removed by the chips. The Oemeta analytical test case contains the most important tools to determine changes in the overall system, allowing prompt action to be taken as needed.