Neat cutting oil and grinding oil – High-quality machining oil for cutting processes

Neat cutting oil and grinding oil, often also referred to as machining oil, is used, for example, for tapping, drilling or grinding and ensures optimum results with various materials. Our high-quality machining oils are based on the latest generation of oils. In the advanced gas-to-liquid (GTL) process, very pure, synthetic base oils are obtained from natural gas, which are free from organic nitrogen, heavy metals, zinc and chlorine compounds. The process safety of our GTL oils has been proven by various approvals from well-known customers in the automotive and supplier industry as well as from machine manufacturers. Discover our wide range of cutting oil and grinding oil.


What makes our cutting oil and grinding oil stand out?

Our high-performance machining oils - the Oemeta OEMETOLE - are characterized by a very high flash point and a very low tendency to evaporate. This ensures good occupational safety and lower consumption. The higher lubricating performance and improved foaming behavior of GTL oils compared to conventional mineral or hydrocrack oils also reduce wear and improve process reliability.

Get in touch now

What is the GTL (Gas to Liquid) process?

The GTL process involves mixing natural gas and oxygen to form syngas. This is combined by means of a Fischer-Tropsch synthesis to form long-chained paraffin waxes. In the next step – the hydrocracking process – the long-chained paraffin waxes are converted into liquid hydrocarbons (saturated short-chained paraffins) by means of cracking, isomerisation and subsequent fractionation.

Cutting oil and grinding oil from Oemeta – advantages at a glance

  • Neutral odour
  • Very low evaporation loss
  • Low foaming and high air separation characteristics
  • Improved filterability and greater economic efficiency due to low density
  • Not cytotoxic – tested in accordance with EN ISO 10993-5:2009
    (body compatibility/biocompatibility as a prerequisite in medical technology, e.g. for the use of implants)
  • Outstanding lubricating performance due to selected EP and AW additives

Oemeta GTL oils compared to conventional hydrocracked oils:

Faster air separation
by up to +45 %

Result: higher cooling effect

Very high flash point,
up to +17 %

Result: good occupational health and safety

Lower evaporation*
by up to -60 %

Result: lower consumption, less odour, less misting
*Noack-Test

Less wear*
by up to -20 %

Result: longer tool life
*Reichert-Test


Wide selection of cutting oil and grinding oil

With our product finder you can select the desired parameters and immediately receive the right solution.

Can't find what you're looking for?
For individual inquiries or further information, please contact us at:
info@oemeta.in / Contact form

Reset Product Finder
0 products found

HYTAP

Neat Cutting and Grinding Oils
HYTAP is a high performance tapping and drilling oil for demanding machining processes. The product is suitable for all materials and applications.
Compatible materials:
Aluminium
Grey Cast Iron
Non-ferrous metals
Stainless Steel
Steel
Titanium
Applications:
Drilling
Turning
Milling
Tapping
Learn more

HYTAP CM

Neat Cutting and Grinding Oils
HYTAP CM is a high performance lubricant based on synthetic ester oils. The product achieves best results on all materials and applications. Due to the extremely high viscosity the product is particularly well suited for vertical machining operations. HYTAP CM does not drip-off or flow-off the cutting edge and is easily to remove with aqueous media. The special consistence ensures a simple use of the coolant. Just apply the product via a brush or dip the tool into the can.
Compatible materials:
Aluminium
Grey Cast Iron
Hard Metals
Non-ferrous metals
Stainless Steel
Steel
Applications:
Drilling
Milling
Tapping
Learn more

OEMETOL 556

Neat Cutting and Grinding Oils
OEMETOL 556 is a high performance machining oil for non-ferrous metals based on synthetic ester oils. The product contains special AW- and EP- additives for enhanced tool life in heavy duty machining.
Compatible materials:
Grey Cast Iron
Stainless Steel
Steel
Applications:
Drilling
Turning
Milling
Honing
Grinding
Deep Drilling
Learn more

OEMETOL 600 HC

Neat Cutting and Grinding Oils
OEMETOL 600 HC is a high performance straight oil, based on modern hydrocrack oils. The product is suitable for all prevalent machining processes.
Compatible materials:
Aluminium
Grey Cast Iron
Stainless Steel
Steel
Applications:
Drilling
Turning
Milling
Grinding
Learn more

OEMETOL 600 Y

Neat Cutting and Grinding Oils
OEMETOL 600 Y is a high performance neat oil, based on modern hydrocrack oils. The product is especially designed for all prevalent machining processes with non-ferrous metals.
Compatible materials:
Non-ferrous metals
Applications:
Drilling
Turning
Milling
Grinding
Learn more

OEMETOL 605 HM

Neat Cutting and Grinding Oils
OEMETOL 605 HM is a high performance neat cutting oil of the latest generation, based on GTL- oils. In the “Gas-to-Liquids” process synthetic base oil is produced from nature gas, oxygen and steam. The product is particularly recommended for honing and superfinishing processes of hard metals. The oil is characterised by its low emission.
Compatible materials:
Hard Metals
Applications:
Honing
Grinding
Learn more

OEMETOL 610 GT

Neat Cutting and Grinding Oils
OEMETOL 610 GT is a high performance neat cutting oil of the latest generation, based on GTL- oils. In the “Gas-to-Liquids” process synthetic base oil is produced from nature gas, oxygen and steam. The product is characterised by his particularly high flashpoint and very low evaporation loss and is recommended for all standard machining processes.
Compatible materials:
Aluminium
Grey Cast Iron
Stainless Steel
Steel
Applications:
Drilling
Turning
Milling
Grinding
Learn more

OEMETOL 615 GT

Neat Cutting and Grinding Oils
OEMETOL 615 GT is a high performance cutting oil of the latest generation, based on GTL- oils. In the “Gas-to-Liquids” process synthetic base oil is produced from nature gas, oxygen and steam. The product is characterised by his particularly high flashpoint, extreme low evaporation loss and is recommended for standard and demanding machining processes.
Compatible materials:
Aluminium
Grey Cast Iron
Stainless Steel
Steel
Applications:
Drilling
Turning
Milling
Learn more

OEMETOL 615 HC/A

Neat Cutting and Grinding Oils
OEMETOL 615 HC/A is a high performance straight oil, based on modern hydrocrack oils. The product is suitable for the demanding machining processes. Outstanding lubricating performance due to selected EP-additives ensures minimum tool wear.
Compatible materials:
Aluminium
Grey Cast Iron
Stainless Steel
Steel
Applications:
Drilling
Turning
Milling
Learn more

OEMETOL 620 GT

Neat Cutting and Grinding Oils
OEMETOL 620 GT is a high performance cutting oil of the latest generation, based on GTL-oils. In the “Gas-to-Liquids” process synthetic base oil is produced from nature gas, oxygen and steam. The product is characterised by his particularly high flashpoint and extreme low evaporation loss and is recommended for all standard machining processes till easy deep drilling operations.
Compatible materials:
Aluminium
Grey Cast Iron
Stainless Steel
Steel
Applications:
Drilling
Turning
Milling
Tapping
Learn more

OEMETOL 620 HC

Neat Cutting and Grinding Oils
OEMETOL 620 HC is a high performance straight oil, based on modern hydrocrack oils. The product is designed for all standard machining processes. Outstanding lubricating performance due to selected AW- and EP-additives ensures minimum tool wear.
Compatible materials:
Aluminium
Grey Cast Iron
Stainless Steel
Steel
Applications:
Drilling
Turning
Milling
Tapping
Learn more

OEMETOL 620 Y

Neat Cutting and Grinding Oils
OEMETOL 620 Y is a high performance neat oil, based on modern hydrocrack oils. The product is designed for all standard machining processes. Outstanding lubricating performance due to selected AW- and EP additives ensures minimum tool wear.
Compatible materials:
Non-ferrous metals
Applications:
Drilling
Turning
Milling
Learn more

OEMETOL 630 GT/A

Neat Cutting and Grinding Oils
OEMETOL 630GT/A is a high performance broaching oil of the latest generation, based on GTL-oils. In the “Gas-to-Liquids” process synthetic base oil is produced from nature gas, oxygen and steam. The product provides an ideal tool wear in demanding broaching processes due to the excellent lubricating performance and special additives.
Compatible materials:
Grey Cast Iron
Stainless Steel
Steel
Applications:
Broaching
Learn more

OEMETOL 630 HC

Neat Cutting and Grinding Oils
OEMETOL 630 HC is a high-performance broaching oil of the latest generation based on hydrocracking oils. Due to the high lubrication performance and special additives, the product offers an ideal tool wear protection in demanding broaching processes.
Compatible materials:
Grey Cast Iron
Stainless Steel
Steel
Applications:
Broaching
Learn more

How can we help you?

If you’re interested in our products and services or have any questions or suggestions, please don’t hesitate to contact us.

Oemeta India Pvt. Ltd. 

c/o Roedl and Partner
Lunkad sky cruise – wing B
Viman nagar 
Pune 411014
INDIA