Water-miscible metalworking fluids for machining

Water-miscible metalworking fluids are metalworking fluids (MWF) that are mixed with water before use. Oemeta's water-miscible metalworking fluids are usually supplied as a concentrate and are then mixed directly on site at your machine tool. We offer you a comprehensive range of water-miscible metalworking fluids.


What is special about water-miscible metalworking fluids?

As a lot of heat is generated during a machining process, it must be absorbed and dissipated quickly. This is where the strength of water-miscible metalworking fluids comes into play: as the water-miscible MWF consists of approx. 95% water, a much greater amount of energy can be absorbed than with a non-water-miscible MWF due to the high heat capacity of water. In addition, more energy is extracted from the system when the water evaporates (heat of evaporation) and this is also dissipated more quickly (thermal conductivity).

What are the advantages of water-miscible metalworking fluids?

Water-miscible MWF from Oemeta are characterized by particularly high performance. Our innovative emulsifier packages simply separate tramp oil on the surface of the metalworking fluid. This makes it even easier to remove tramp oil and keeps the MWF clean and efficient.

Our water-miscible MWF also impress with their low consumption. For example, a comparison of NOVAMET 920 with a conventional MWF showed a demonstrable reduction in consumption of over 20 %.

Many of our water-miscible MWF also offer improved occupational safety. The good skin compatibility of some products has been proven by BUS/TEWL tests.

At a glance:

  • High lubricating performance thanks to state-of-the-art additive technologies
  • Low consumption due to good flow behavior
  • Clean machines and components thanks to high washing activity
  • High human compatibility

What types of water-miscible metalworking fluids are there?

Water-miscible metalworking fluids are divided into water-soluble and emulsifiable metalworking fluids.

Water-soluble metalworking fluids

Water-soluble metalworking fluids form a solution when mixed with water - these MWF therefore dissolve completely in water.

Emulsifiable metalworking fluids

When mixed with water, emulsifiable metalworking fluids form an oil-in-water emulsion, which typically has a milky appearance.

Our range of water-miscible metalworking fluids

With our product finder you can select the desired parameters and immediately receive the right solution.

Can't find what you're looking for?
For individual inquiries or further information, please contact us at:
csrusa@oemeta.com / +1 801 953 0134 / Contact form

Reset Product Finder
0 products found

ESTRAMET S 77

Water-miscible cooling Lubricants
ESTRAMET S 77 is a mineral oil-free high performance product based on synthetic ester oils. This coolant of the latest generation combines high performance with ideal cost efficiency. The product is especially recommended for hard to machine materials such as high-alloyed steel, aluminium-, titanium- and nickel based alloys. The translucent fluid is an alternative to polymer-based, mineral oil-free coolants.
Compatible materials:
Aluminium
Stainless Steel
Steel
Titanium
Applications:
Drilling
Turning
Milling
Tapping
Honing
Reaming
Deep Drilling
Learn more

NOVAMET 875

Water-miscible cooling Lubricants
NOVAMET 875 is an all-purpose product primary suitable for the machining of steel and aluminium alloys. The product features high performance and low consumption in a broad application area.
Compatible materials:
Aluminium
Stainless Steel
Steel
Applications:
Drilling
Turning
Milling
Grinding
Learn more

NOVAMET 881

Water-miscible cooling Lubricants
NOVAMET 881 is a boron- and biocide free multipurpose product for the machining of ferrous and non-ferrous metals. The product features very high performance and low consumption in a broad application area.
Compatible materials:
Grey Cast Iron
Steel
Applications:
Drilling
Turning
Milling
Grinding
Learn more

NOVAMET 910

Water-miscible cooling Lubricants
NOVAMET 910 is an all-purpose product for the machining of ferrous and non-ferrous metals. The product features high performance and low consumption in a broad application area.
Compatible materials:
Aluminium
Stainless Steel
Steel
Applications:
Drilling
Turning
Milling
Broaching
Reaming
Grinding
Deep Drilling
Learn more

NOVAMET 910 B

Water-miscible cooling Lubricants
NOVAMET 910 B is an all-purpose product for the machining of ferrous and non-ferrous metals. The product features high performance and low consumption in a broad application area.
Compatible materials:
Aluminium
Stainless Steel
Steel
Titanium
Applications:
Drilling
Turning
Milling
Broaching
Reaming
Grinding
Deep Drilling
Learn more

UNIMET 183

Water-miscible cooling Lubricants
UNIMET 183 is a bactericide-free, robust and economical cooling lubricant for light to medium machining of steel materials.
Compatible materials:
Grey Cast Iron
Steel
Applications:
Drilling
Turning
Milling
Grinding
Learn more

UNIMET AS 260

Water-miscible cooling Lubricants
UNIMET AS 260 is a particularly efficient product that can be used for a large variety of machining applications and materials including steel and cast iron.
Compatible materials:
Grey Cast Iron
Steel
Applications:
Drilling
Milling
Grinding
Learn more

How can we help you?

If you’re interested in our products and services or have any questions or suggestions, please don’t hesitate to contact us.

Oemeta Inc.

5655 West 610 South
Salt Lake City, UT 84104
USA